Wood puzzle considerations for details

&Nbsp;   (a) spell Board room environment controls 1, spell room temperature is 20 c ~25 c, too high or too low can affect the bond strength.
&Nbsp;   2, must control the right humidity, relative humidity of the air is best controlled at 45%~65%.
&Nbsp;   3, the balance of moisture in the air to ensure 8%~65%.
&Nbsp;   4, spell when the room is too dry (equilibrium moisture content below 6%), ground water, to ensure that the relative humidity of the air is not too low.
&Nbsp;   (b) storage of glue 1, when wood moisture content of solid is higher than 12%, the wood should be dried, making it water rate dropped to 12% before processing.
&Nbsp;   2, when dried, drying room including water dropped to 38 ~45 ℃, relative humidity should be maintained at 45%~68%, equilibrium moisture content in the air should be maintained at 8%~10%.
&Nbsp;   3, drying, the wood each layer shall be separated by a small strip of wood, and there should be space between the layers.
&Nbsp;   4, drying process, each must measure moisture content in an hour, and check whether the wood is wood with wood cracking, end checks and so on. If present, this phenomenon can reduce oven temperature and check whether the oven the equilibrium moisture content is low.
&Nbsp;   5, drying of wood stacked in a drying room should be avoided when cooling air inlet.